Yes, this is exactly what the MaxxTow Dual Hitch Extender for 2" Trailer Hitches, # MT70070 is intended for. However, keep in mind that per manufacturer this reduces your hitch rating by 50%. The extender has a weight rating of 400 lbs. tongue weight and gross trailer weight rating of 4,000 lbs. so please compare this to the vehicle you are flat towing. While the # MT70070 is designed to allow you to add an accessory such as a bike rack and use the tow bar, you cannot use an additional... view full answer...
For your 2014 Tiffin Allegro 32 BR the correct Roadmaster Steering Stabilizer is the part # RM-RBK22-RSSA. I attached an install video for this for you to check out as well. view full answer...
If the cameras on your 2011 Tiffin Allegro Motorhome are Rear View Safety cameras then the Rear View Safety Backup Monitor # RVS-6137Q should work but if they are a different brand there is no guarantee if the monitor will actually communicate with them.
If you can let me know what brand your current cameras are I can see if we have a monitor that is compatible with them. Otherwise it would be best to replace your entire camera system with the Rear View Safety Backup Camera System with... view full answer...
Yes, the Replacement Entry Door Hinge part # LC198295 would work on your Tiffin Open Road 35QBA motorhome. This is a standard RV door hinge like what your Tiffin would have currently. view full answer...
The SumoSprings Maxim, part # SSR-183-54-1 is the recommended SumoSprings helper spring kit for your 2017 Tiffin Allegro Open Road 36UA with the 26K chassis.
It's not necessary to remove the rear wheels to install the # SSR-183-54-1, but it might make things easier as the absence of the wheels will provide more room to work. Since you'll already have existing holes to work with, you can probably get by without removing them if you wish.
Whether you remove the wheels or not, the rear... view full answer...
I called Air Lift to confirm, and you are correct in that the LoadLifter 5000 Ultimate Air Springs, part # AL88240, are not compatible with your 24,000-lb chassis.
We do, however, have springs that are compatible. They are the SumoSprings Rebel Custom Helper Springs, part # SSF-173-40-2. These jounce-style springs are much easier to install and maintain than air springs, and they react appropriately to different loads (rather than the air springs needing manual adjustment when under different... view full answer...
For a hardwired 50 amp cord like what you have you'd have to insert the free end of the cable into the MorRyde part # MR47RR and reel it in that way. If you wanted to change your setup to a detachable cord you certainly could so that you could reel it up from the opposite end.
To do that you'd need to cut the attached cable and install the part # 381684 on one end and then on the other install the # F30ITRPSAM. view full answer...
The length is not adjustable and would not be able to be shortened on the Thule Rod Vault 2 Rooftop Fly Rod Carrier - Locking - 2 Fly Rods Item # TH27YV. view full answer...
The trailer brake controller in the cab of the motorhome won't interfere with the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700. They are two completely separate systems which do not interact with one another. The trailer brake controller controls electric brakes and the supplemental braking system controls hydraulic brakes. view full answer...
I went ahead and checked to see what was available for your motorhome, and it appears that only a front anti sway bar # RM-1209-136 and a steering stabilizer # RM-RBK18-RSSA is available.
The steering stabilizer is designed to compensate for oversteering, reduce road fatigue and keep you centered so you don't have to work as hard to steer. view full answer...
Yes, if you could mount the brackets of the Curt TruTrack part # C17500 back 30 inches from the coupler ball hole then they would fit easily. view full answer...
The Wheel Masters Lug Nut Covers # WM8019 snap on over the lug nuts.
The lug nut covers have a stainless steel construction that is rustproof and provides a long-lasting shine.
I attached a review video link below. view full answer...
For V-nose trailers the solution to allow chain hangers to attach to the trailer frame is to go with bolt on hangers like the part # RP58305 which attach to the side of the trailer frame and do not require clearance above it. So for a Reese system you could use with this system the # RP66542 would work great as it has a tongue weight range of 600-1,200 lbs. view full answer...
Yes the Furrion RV Tankless Water Heater # FR48SR will fit in place of the Atwood cg6aa-9e that you have in your motorhome. It won't be a one hundred a direct fit but it will install relatively easy. We also recommend having a pro handle the install of this. view full answer...
That's exactly why you need to use electric steps like what we see with the Kwikee Series 42 # LC372779 steps. Class A motorhomes just have that one entrance which would make it too difficult to utilize a pull down step like the Lippert SolidStep # LC791574.
I you're needing to replace your electric steps then the 42 Series I mentioned above are a good fit if the entry height is 15-1/4" - 17-1/4" and the 29" wide x 18" deep bolt pattern matches. These are designed to open and close when... view full answer...
In order to connect a grill in line with your propane supply you will need to add a propane tee; I recommend using the MB Sturgis Sturgi-Flow T-Fitting for Small Appliance - POL Valve - Disposable Cylinder Port # 103606, which connects directly to your RV propane tank in front of the regulator and provides the propane you need for your grill with a regulator. In order to connect the grill to this tee you'll need something like the # 37207-30825 - it may not be this exact hose, so if you... view full answer...
We do have keyless entries that are for a camper, so long as it is on the left side of your door, and if you measure your cut out and it is 3-3/4" tall x 2-3/4" wide, you can use an option from Global Link:
- Global Link Ultra E Pro Electronic Lock for Travel Trailer # 295-000183 view full answer...
The Curt 2 Bike Platform Rack # C18085 is actually not motorhome rated so eventually the same thing that happened to your Saris would happen to this one.
Instead, I was able to find the Swagman XTC2 Bike Rack for 2 Bikes # S64670 which is pretty similar to the Curt you were looking at but this rack can be used on motorhomes.
This bike rack will work with the same 1-1/4" and 2" trailer hitches the Curt works with, has a comparable weight capacity of 35 lbs per bike for a 70 lb total,... view full answer...
Yes you can replace your Furrion Chill RV AC FAC1511MA-W with an air conditioner with a heat pump. I recommend checking out the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor, and Heat Strip # ACM135CH.
This unit has a 13.5K Btu cooling capacity, includes a start capacitor, an air distribution box and a heat strip. This unit is a bit smaller at 13.5K Btu, however if you wanted to stick with the larger size you can use # ACM150CH instead. view full answer...